You are here: PRODUCT > UPS > On-Line UPS AHA-H 103HR/303HR LED

Product

ProdcutLines

Options

On-Line UPS AHA-H 103HR/303HR LED

Features

Multiple Microprocessor design base
Detachable control panel with LCD
Unity input power factor and wide input range
Robust design with output transformer
True sine-wave double conversion on-line UPS
DC start and automatic self-diagnostic function
Capacity of battery unlimited and alarm silent
RS232 communication port and built-in SNMP slot
High efficiency design to save electricity
Low heat dissipation in long term operation
Designed to operate under harsh environment
Enhanced protections against lighting surges, disturbances etc..

Specifications

Overview

The Vesta series provides comprehensive protection and high power density in small and economic package. Compared to traditional UPS towers of the same size, Vesta UPS is more compact and offers greater comprehensive power protection against surges and spikes. Equipped with a voltage stabilizer, this UPS will continue providing clean and stable power to connected equipment while its embedded microprocessor controller guarantees high reliability, perfect for any home or small office applicatio

Specifications

Model (LED Series)			AHA-103HR	AHA-203HR		AHA-303HR
Input	Capacity		1KVA/700W	2KVA/1400W		3KVA/2100W
	Phase		Single Phase
	Nominal Voltage		220Vac/110Vac
	Voltage Range		160-300Vac(70%-100%load),140-300Vac (50%-70% load), 118-300Vac (0%-50% load)
	Frequency		50Hz / 60Hz 4Hz
	Power Factor		0.95	0.97
Output	Voltage		220VAC 2% (230V or 240V re-settable via LCD panel) 110V 2% (100V,115V or 120V re-settable via LCD panel )
	Frequency		Synchronized ( Line mode); 50Hz or 60Hz +/-0.5% (Battery mode)
	Wave-form		True Sine wave
	Distortion	Tower	3% (linear load) 6% non-linear load)	4% (linear load) 7% non-linear load)
		Rack	4% (linear load) , 7% non-linear load)
	Overload Capacity		105%~125% : 30 sec, UPS go bypass. >125% : UPS go Bypass immediately. Load reduce to 90%, UPS go back to inverter mode automatically. > 150%: 300ms,UPS shutdown.
	Crest Ratio		3: 1
Battery	DC Voltage		36V	96V
	Capacity		12V / 7Ah X 3 pcs	12V / 7Ah X 8pcs
	Back-up Time		5min.	9min.	5min.
Charger	Built-In /Option		1Amp/8Amp	1Amp/8Amp
	Recharging Time		5 hrs to 90%
Bypass	Automatic		Overload or UPS fault
	By setting		Voltage Range: 176~256V20V (Re-settable via LCD panel)
	Transfer Time		0 ms( 2.5ms inverter to bypass)
Indicator	LCD (Series)		UPS status, I/P&O/P Voltage & Frequency ,Load %, Battery Voltage, Battery Capacity % ,Temperature, Model Spec., Event Log. LED: Normal (Green), Warning (Yellow), Fault (Red)
	LED (Series)		Normal (Green), Bypass(Yellow), Battery Low (Yellow), Inverter (Green), Load% (5 LEDs), Battery % (5 LEDs), Fault(Red)
Outlet	Tower		NEMAx3pcs or IEC320x4pcs	NEMAx6pcs or IEC320x6pcs	NEMAx6pcs or IEC320x3+ TBx1
	Rack		NEMAx4pcs or IEC320x4pcs	NEMAx2+TBx1 or IEC320x4pcs	NEMAx2+TBx1 or IEC320x1+TBx1
Audible Alarm	Battery Mode		Beeping every 4 seconds (re-settable)
	Battery Low		Beeping every seconds
	Overload		Beeping twice per second
	Fault		Beeping Continuously
Interface	RS-232 Interface		UPSilon2000 monitoring software for Windows all, Unix systems and Novell.
	Multi-Interface Slot		SNMP card, AS 400, Dry Contact, USB Selectable
Network	Surge Protection		RJ45 I/O port for Network or RJ 11 for Fax / Modem
Parallel			N/A
Environment	Temperature		0~40J; 32~104K
	Humidity		0-95% non-condensing
	Acoustic Noise		45 dBA ( at 1M )	50 dBA ( at 1 M)
Physical	Weight (w/o Battery		6.5 kgs (Tower) 8.0 kgs (Rack)	13.5kgs (Tower) 9.5 kgs ( (Rack)	14.5kgs(Tower) 10.5kgs (Rack)
	Weight (w/ Battery)		15 kgs (Tower) 15.5 kgs (Rack)	34 kgs (Tower) N/A (Rack)	35 kgs (Tower) N/A (Rack)
	Dimension WHD	Tower	160 x 220 x 400 mm	200 x 352 x 450 mm
		Rack	440 x 88 x 465mm (Rack)
	Color		White or Black
 Tower Series: AHA-H, Rack Series: AHA-HR  Rack Battery Bank (2U) is available for 8pcs (1 set) 12V/7Ah and 9pcs (3 sets) 12V/7Ah batteries.  *Specifications are subject to change without notice.